This Is What How Much Is A Ghost Immobiliser Will Look In 10 Years' Ti…

Ghost 2 Immobiliser Problems

The Ghost 2 immobiliser, designed to safeguard cars from key cloning or hacking is a discreet device which can be put in place without causing any damage to your vehicle. It will not allow you to start your car unless you have entered the correct sequence of buttons in your vehicle. It is similar to the mobile password.

Stop/Start

Ghost Immobilisers prevent vehicles from being stolen by preventing the engine from starting unless it receives the correct PIN code. This is done without modifying the vehicle, and is undetectable by thieves. The unit communicates with the ECU via the CAN data bus, which allows it to lock the vehicle. This system is similar to the one that automobile manufacturers have used in their cars for years However, thieves cannot add a new key or utilize key relay technology to bypass it like they can with factory fitted systems.

Ghost is compatible with any vehicle with an engine, including cars, vans, motorhomes and caravans, as well as bikes. The same system is compatible with electric cars. It's a great alternative to locking the steering wheel and wheel clamps and can be installed with a minimum of effort.

When the Ghost is activated, it will block all the buttons in your vehicle and stop the ignition from being started unless a PIN code has been entered prior to. This can be done via the Android or Apple mobile apps or by entering the code through your key fob. If a wrong code is entered the app will show an indicator light and the Ghost will not allow the vehicle to be started again. This is a great deterrent. if the vehicle can't be started the thief will continue to pursue a new target.

The Ghost is a small, weatherproof device that is able to be hidden away in the most difficult to access parts of your vehicle. Installation takes between 20-30 minutes for each vehicle. It is also very simple to remove should you decide to change your vehicle or hand it in for valet parking or service. It is an TASSA (Tracking and Aftermarket Security Systems Association) insurance-approved system, and is recognized by some insurers. It also has an emergency security feature that is secured by Pin Code Override, and a Service/Valet mode which can be activated by pressing a button on the app or by using your key fob.

Disarm

Unlike the mechanical anti-theft devices, which are able to be removed and reinstalled, ghost immobilisers are concealed and integrated into the vehicle. Even if they were discovered, thieves would not be able to start the car. They are almost impossible to bypass or hack. A ghost immobiliser is protected from key cloning, as well as signal jamming and devices spoofing. These are techniques thieves employ to gain entry into vehicles equipped with standard immobilisers.

The immobiliser sends a code to the ECU. If a incorrect code is received and the vehicle is not started as the engine will not start up. It is possible to disable a ghost immobiliser with a software tool, but it would be extremely difficult and time-consuming to accomplish this. Only an authorised installer can install and use the software.

The Ghost immobiliser is a tiny system that sits within the vehicles wiring loom and is invisible to the naked eye after it has been installed. It doesn't show up on diagnostic systems. There are no LED indicators and it isn't able to communicate with the engine through the OBD port. It communicates in silence through the CAN data loop.

The system will not allow the vehicle to start unless it is provided with an input PIN number that is specified by the user. The PIN code is entered via buttons on the steering wheel or door panels, or on the centre console. This is a better way to safeguard your car because it doesn't need an additional remote control or key fob.

In addition, Ghost has an option for service that can be activated through the application on your mobile phone. This will allow you to give your keys to a person for servicing or valet parking without entering the disarm sequence.

Whether your Ghost is in service mode or not you should never attempt to remove the system on your own as it can affect the engine and cause damage. It is recommended that you contact an TASSA verified installer who can remove the system safely and properly. Our most recent GHOST II immobilisers also come with a special QR fingerprint sticker that is hidden in different areas of your vehicle. these are linked to our global security register. In the event the system is removed and sold on the black market this will connect it back to its original owner.

Anti-Hijack

Ghost Immobiliser 2 has a extremely useful anti-hijack feature. This is a clever key that shields your vehicle from thieves. If the ignition switch is turned to on, and the car remains stationary for a period of 30 seconds then the Ghost system will automatically stall the engine and turn the hazard lights on. This allows the driver and passengers enough time to press the hidden security button before the system is reactivated.

The Ghost system, unlike most competitors, has a timer and controller unit that shuts off the fuel shut-off valve 14 after a predetermined time. This is regardless of whether the ignition is on. This delay period should be long enough to allow the person who was hijacked to get away, and be a sufficient distance from the car that it is stuck before the system is reactivated.

In addition to the standard CANbus immobiliser blocking capabilities of the ghost immobiliser tracker system, it comes with an additional level of security that prevents common hacking techniques that are used to hack into modern cars such as relay attacks key range extending, key range hacking and ECU swapping. This is because the Ghost system communicates silently and does not emit any signals that could be detected by thieves using RF scanning or code grabbing technology.

The Ghost system also has the option of a Service/Valet mode that allows your vehicle to be temporarily started and driven without the need for PIN codes. This is great for parking your car and need to be away for a short amount of time, for example, to store groceries in the boot, or open a garage door, etc. The system will end service mode based on speed and time or through the simple PIN code entry process, giving you complete assurance that only YOU can use your vehicle!

Keyless Entry

Many customers are seeking additional security measures due to the growing trend of thefts from cars using contactless. This is particularly applicable to those who have invested time or money in personalizing their vehicles and own expensive or rare vehicles. Immobilisers that are added to your vehicle can be a good way to prevent this kind of theft, as they can prevent your vehicle from starting until the proper pin code is entered along with your key fob.

Immobilisers are designed for various vehicle circuits, including ones that control starter motors as well as fuel pumps. They can also turn off the alarm for cars in order to draw attention and scare away potential thieves.

These devices communicate with the engine control unit (ECU) through the CAN data circuit, and they stop thieves from trying to bypass it by putting in a new ECU or using a key programmer. These immobilisers are put in place discretely and do not leave any marks on your vehicle. They are also undetectable by hi-tech thieves' tools.

The ghost 2 immobiliser problems immobiliser is unlike other systems that require drivers to carry tags or an app. Instead, you can choose your personal pin sequence by pressing a pattern on your door, steering panel, or centre console. The pin can easily be changed, making the device as secure as a bank card. It's also more difficult to hack because it requires up to 20 press.

Ghost also has a Valet/Service mode, which permits users to deactivate it when you are going to give your vehicle for valet parking, or service. This allows the system to operate within the parameters, such as a 30-mph speed limit. The system can be reactivated using the original key or entry code.

This makes it the most efficient and secure aftermarket CAN-based immobiliser on the market and is fully insurance approved by Thatcham as an accessory for your car when fitted by one of our accredited installers. The Ghost 2 immobiliser is also provided with six QR fingerprint labels and an ISR contact card that contains your unique QR code, as well as an emergency number that is secure that you keep in the wallet/purse of your vehicle.