10 Things Everybody Hates About Repairs To Upvc Windows

Repairs to uPVC Windows

uPVC is a great choice for modern homes. They are long-lasting, durable and easy to maintain. They are not susceptible to rot or rust like timber and aluminum.

Cleaning and lubricating regularly UPVC windows and doors is essential. This will help prevent costly repairs and increase energy efficiency.

1. Broken Glass

The broken glass in your windows could cause significant damage to your home and even be fatal. It is essential to ensure that your windows are in good working order.

For single pane windows it is relatively easy to replace them, and the replacement will generally fit within the frame of the previous one easily. If you have double-paned windows which are held together by internal beading, it is more difficult to remove and replace the old panes. In this instance, it is necessary to purchase plastic spacers in order to help the new pane fit into the window frame.

If you're planning to attempt to remove the glass panes yourself it is crucial to wear the proper safety gear, including thick gloves and protective eyewear. It is also recommended to lay down a drop cloth prior to when you start working on the glass, so that any shards will fall onto the cloth instead of landing on the floor where they can be trodden under and cause further damage.

Once the glass is removed from the window, it's best to cover the gap with some clear packaging tape or duct tape to stop water and drafts from entering the home until a professional can come out and fix the window. This will also act as a barrier that will prevent any intruders to gain access into your home. If the gap between the window and the door is substantial, you may want to use an alarm system that includes windows. This will give you the best of both.

2. Sagging

uPVC windows and doors are a low-cost, durable and energy-efficient alternative to timber windows with sash. However, replacement over time, they may be afflicted by a variety of issues like sagging. A sagging uPVC window can cause issues with light, draughts, and even security. If you notice that your uPVC window is beginning to lose its shape, it's important to act quickly to stop the issue from becoming worse.

To fix a sagging window you can try to reposition the hinges. To accomplish this, you'll need to open the window so that you can access the frame. With an screwdriver, remove the hinges on the top and bottom and adjust them by turning them clockwise or anti-clockwise. Once you've adjusted the hinges, close the window and verify the fit. If you are happy with the fit of your window, you can tighten screws to hold them in the right position.

If you are unable to reposition the hinges, you may need to replace the seal. As time passes, rubber seals lose their elasticity and become dry and cause their tightness to decrease. It is important to replace your seal as soon as you can to keep your uPVC window waterproof and draughtproof.

UPVC handles can also become loose. This is typically caused by screws that have become undone over time, but it could be due to the handle mechanism getting worn out. It's relatively simple to repair a loose uPVC handle. First, you'll need to close the window and then perform an initial test to ensure that it fits. The joint at the corner of the sash must align with the joint on the casing. If it doesn't, you can use the screwdriver to loosen the handle. Then turn the mechanism back into place.

3. Water Leaks

It is essential to take action if you awake each day to discover mouldy walls and wet floors. The leaks of water from windows do are not just a cause for destruction of your home's structure but also undermine your efforts to regulate the temperature within your home. Most of the time, uPVC window leaks are caused by a lack or damage to the sealant.

It is a fairly easy fix that can be done by any competent DIYer. Depending on the severity of the issue the caulking that was used up may need to be removed before a new layer of caulk can be put on. It is crucial to keep in mind that when it comes to uPVC window repairs you should not be tempted to 'over-caulk' as this will only make the area harder to clean and reduce your energy efficiency.

It is important to check that any drainage holes are free of debris and that the sill pan is angled correctly so that it drains away from the window. In more serious instances, you may need to think about replacing the window.

Moldy sills and rotten ones are other signs of water leakage. This fungus thrives in conditions of dampness and can spread quickly throughout the house.

It is also important to keep in mind that if the leakage is coming from between the glass in your double glazed windows it may be more likely to be an issue with the glass seal, rather than the frame or sliding. A uPVC specialist can easily solve this issue by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

Hinges may be to blame if your uPVC window repair near me is difficult to open or it opens with a breeze. These are easily replaced by any competent DIYer and are usually completed in a matter of minutes.

Like any mechanical component, hinges can wear out over time. The process of replacing a hinge on a window is an easy process, but it's easier to do if you have someone to assist in holding the frame in place.

It is also important to verify that the uPVC hinges are opening and closed in the right direction. Check for the arrows on each hinge to determine which way the window should be opened.

The issue can be caused by opening the window improperly or by a poor installation at the factory. Sending us a photo through our website can often solve the issue. We are always happy to provide suggestions.

Regular lubrication of the hinges is essential. This can be done by applying an oil that is light in nature to the hinges. We suggest using a solvent-free lubricant, such as the 3-in-one Multi-Purpose oil. Regular lubrication can allow the window open and close more easily. It also helps prevent corrosion and reduce the risk of sticking. This is recommended to be done at least every year. WD40 and other solvent-based fluids are not recommended since they will damage parts of your uPVC window.

5. Draughts

Draughts in upvc windows can be caused by a few different things. The hinges, also due to wear and tear can become misaligned, this can cause an opening to appear where the sash joins the frame. These can be easily repaired by giving them a good clean, but when they're beyond repair, it could be necessary to have them aligned or replaced. Secondly the interlock, this is located on the hinge side of the window, may also be misaligned, and again it may be feasible to give them a good clean, but in certain cases, it may be necessary to have these replaced.

The next most common reason for draughts is window seals. These are prone to wear or damaged over time and allow air to escape through these gaps. This can be avoided by replacing them with high-quality weatherstripping. Another option is to replace the window repairs near me with low-emissivity glass, this will help to regulate indoor replacement temperatures, and also reduce draughts.

The final method to cut down on the amount of draughts is to use a draught-excluder. These are usually made of fabric tubes filled with a filler, which can be placed over your window sill. These will keep your home warm by blocking cold air.

Your windows made of upvc will remain a great source of insulation and security for your home with a little regular maintenance and repairs. It is crucial to keep in mind that all windows eventually become worn out, and it could be cheaper to replace them than to repair them. If you are having issues with your upvc windows, it is recommended to seek assistance from a professional immediately.